zhongziso种子搜
首页
功能
磁力转BT
BT转磁力
使用教程
免责声明
关于
zhongziso
搜索
Udemy - BLENDER - Creating the Dune Ornithopter from start to finish
magnet:?xt=urn:btih:e9159d74a40f564e1b21acf23db4193180afd13b&dn=Udemy - BLENDER - Creating the Dune Ornithopter from start to finish
磁力链接详情
Hash值:
e9159d74a40f564e1b21acf23db4193180afd13b
点击数:
277
文件大小:
41.21 GB
文件数量:
157
创建日期:
2023-6-29 14:05
最后访问:
2024-5-19 03:21
访问标签:
Udemy
-
BLENDER
-
Creating
the
Dune
Ornithopter
from
start
to
finish
文件列表详情
3. Unwrapping/4. 096_Unwrapping section_Starting with the body part 4.mp4 444.5 MB
1. Introduction/2. Before you start.mp4 40.58 MB
2. Modeling/1. 003_Adding the reference images.mp4 107.88 MB
2. Modeling/10. 012_Modeling section_Creating the windshield.mp4 319.04 MB
2. Modeling/11. 013_Modeling section_Creating the door.mp4 427.3 MB
2. Modeling/12. 014_Modeling section_Using shrinkwrap modifier to fix the door shading issues.mp4 213.26 MB
2. Modeling/13. 015_Modeling section_Creating the door window part 1.mp4 131.91 MB
2. Modeling/14. 016_Modeling section_Creating the second door window.mp4 262.28 MB
2. Modeling/15. 017_Modeling section_Creating the door and windshield frame.mp4 341.16 MB
2. Modeling/16. 018_Modeling section_Adding details to the body part 1.mp4 262.96 MB
2. Modeling/17. 019_Modeling section_Adding Bevel modifier.mp4 308.44 MB
2. Modeling/18. 020_Modeling section_Using solidify to create rims.mp4 308.88 MB
2. Modeling/19. 021_Modeling section_Learn how to use Bool Tool.mp4 200.24 MB
2. Modeling/2. 004_Scaling the images.mp4 106.08 MB
2. Modeling/20. 022_Modeling section_Start modeling the top body details part 1.mp4 315.09 MB
2. Modeling/21. 023_Modeling section_Start modeling the top body details part 2.mp4 236.62 MB
2. Modeling/22. 024_Modeling section_Start modeling the top body details part 3.mp4 157.75 MB
2. Modeling/23. 025_Modeling section_Start start with the top tail details.mp4 154.96 MB
2. Modeling/24. 026_Modeling section_Start with the top tail details 2.mp4 161.01 MB
2. Modeling/25. 027_Modeling section_Add Bevel modifier to the top details of the Ornithopter.mp4 245.98 MB
2. Modeling/26. 028_Modeling section_Learn how to use Carver tool.mp4 169.2 MB
2. Modeling/27. 029_Modeling section_Creating the front light detials.mp4 271.28 MB
2. Modeling/28. 030_Modeling section_Creating the front light details part 2.mp4 201.16 MB
2. Modeling/29. 031_Modeling section_Creating the front light details part 3.mp4 246.92 MB
2. Modeling/3. 005_Modeling section_start modeling the Ornithopter.mp4 227.73 MB
2. Modeling/30. 032_Modeling section_Creating the front light details part 4.mp4 305.24 MB
2. Modeling/31. 033_Modeling section_Creating the front light details part 5.mp4 325.46 MB
2. Modeling/32. 034_Modeling section_Creating the front light details part 6.mp4 354.29 MB
2. Modeling/33. 035_Modeling section_Adding Bevel to the light part 1.mp4 374.62 MB
2. Modeling/34. 036_Modeling section_Adding Bevel to the light and fixing some problems part 2.mp4 308.77 MB
2. Modeling/35. 037_Modeling section_Bottom parts part 1.mp4 257.5 MB
2. Modeling/36. 038_Modeling section_Bottom parts part 2.mp4 216.66 MB
2. Modeling/37. 039_Modeling section_Bottom parts part 3.mp4 269.55 MB
2. Modeling/38. 040_Modeling section_Bottom parts part 4.mp4 345.09 MB
2. Modeling/39. 041_Modeling section_Bottom parts part 5.mp4 246.17 MB
2. Modeling/4. 006_Modeling section_Modeling the front side of the Thopter.mp4 323.37 MB
2. Modeling/40. 042_Modeling section_Bottom parts part 6.mp4 206.73 MB
2. Modeling/41. 043_Modeling section_Bottom parts part 7.mp4 329.59 MB
2. Modeling/42. 044_Modeling section_Bottom parts part 8.mp4 264.28 MB
2. Modeling/43. 045_Modeling section_Bottom parts part 9.mp4 155.14 MB
2. Modeling/44. 046_Modeling section_Bottom parts part 10.mp4 265.15 MB
2. Modeling/45. 047_Modeling section_Bottom parts part 11.mp4 298.27 MB
2. Modeling/46. 048_Modeling section_Bottom parts part 12.mp4 280.08 MB
2. Modeling/47. 049_Modeling section_Bottom parts part 13.mp4 267.8 MB
2. Modeling/48. 050_Modeling section_Bottom parts part 14.mp4 348.3 MB
2. Modeling/49. 051_Modeling section_Bottom parts part 15.mp4 333.73 MB
2. Modeling/5. 007_Modeling section_Modeling the top area of the body.mp4 220.85 MB
2. Modeling/50. 052_Modeling section_Bottom parts part 16.mp4 320.72 MB
2. Modeling/51. 053_Modeling section_Creating the front leg joints and the bolts.mp4 275.66 MB
2. Modeling/52. 054_Modeling section_Creating the back leg joints part 1.mp4 335.03 MB
2. Modeling/53. 055_Modeling section_Creating the back leg joints part 2.mp4 282.69 MB
2. Modeling/54. 056_Modeling section_ Small parts left to finish the bottom ornithopter side.mp4 183.99 MB
2. Modeling/55. 057_Modeling section_Adding Bevel modifier.mp4 289.56 MB
2. Modeling/56. 058_Modeling section_Adding Bevel modifier part 2.mp4 294.96 MB
2. Modeling/57. 059_Modeling section_Adding Bevel modifier part 3.mp4 244.27 MB
2. Modeling/58. 060_Modeling section_Adding Bevel modifier part 4.mp4 382.66 MB
2. Modeling/59. 061_Modeling section_Adding Bevel modifier part 5.mp4 346.43 MB
2. Modeling/6. 008_Modeling section_Modeling the middle bottom side of the Thopter.mp4 226.68 MB
2. Modeling/60. 062_Modeling section_Adding Bevel modifier part 6.mp4 352.29 MB
2. Modeling/61. 063_Modeling section_Adding Bevel modifier part 7.mp4 336.71 MB
2. Modeling/62. 064_Modeling section_Adding Bevel modifier part 8.mp4 366.35 MB
2. Modeling/63. 065_Modeling section_Starting with the front legs part 1.mp4 276.08 MB
2. Modeling/64. 066_Modeling section_Starting with the front legs part 2.mp4 255.03 MB
2. Modeling/65. 067_Modeling section_Starting with the front legs part 3.mp4 328.41 MB
2. Modeling/66. 068_Modeling section_Starting with the front legs part 4.mp4 333.12 MB
2. Modeling/67. 069_Modeling section_Starting with the front legs part 5.mp4 220.57 MB
2. Modeling/68. 070_Modeling section_Starting with the front legs part 6.mp4 119.08 MB
2. Modeling/69. 071_Modeling section_Starting with the front legs part 7.mp4 275.9 MB
2. Modeling/7. 009_Modeling section_Modeling the tail of the Thopter.mp4 278.99 MB
2. Modeling/70. 072_Modeling section_Starting with the back legs part 2.mp4 249.43 MB
2. Modeling/71. 073_Modeling section_Starting with the back legs part 3.mp4 368.54 MB
2. Modeling/72. 074_Modeling section_Starting with the back legs part 4.mp4 294.58 MB
2. Modeling/73. 075_Modeling section_Adding bevel modifier to the front legs part 1.mp4 294.71 MB
2. Modeling/74. 076_Modeling section_Adding bevel modifier to the front legs part 2.mp4 197.9 MB
2. Modeling/75. 077_Modeling section_Adding bevel modifier to the Back legs part 1.mp4 313.42 MB
2. Modeling/76. 078_Modeling section_Adding bevel modifier to the Back legs part 2.mp4 273.68 MB
2. Modeling/77. 079_Modeling section_Aligning the back leg joint to the legs arm.mp4 125.59 MB
2. Modeling/78. 080_Modeling section_Starting with the wings part 1.mp4 330.09 MB
2. Modeling/79. 081_Modeling section_Starting with the wings part 2.mp4 332.65 MB
2. Modeling/8. 010_Modeling section_fixing some issues.mp4 259.53 MB
2. Modeling/80. 082_Modeling section_Starting with the wings part 3.mp4 275.7 MB
2. Modeling/81. 083_Modeling section_Starting with the wings part 4.mp4 348.5 MB
2. Modeling/82. 084_Modeling section_Starting with the wings part 5.mp4 340.4 MB
2. Modeling/83. 085_Modeling section_Adding Bevel modifier to the wing.mp4 334.05 MB
2. Modeling/84. 086_Modeling section_Creating the Grill to the ornithopter tail.mp4 373.38 MB
2. Modeling/85. 087_Modeling section_Adding lines to the Body part 1.mp4 353.15 MB
2. Modeling/86. 088_Modeling section_Adding lines to the Body part 2.mp4 431.31 MB
2. Modeling/87. 089_Modeling section_Adding lines to the Body part 3.mp4 338.05 MB
2. Modeling/88. 090_Modeling section_Finishing the body lines and adding a frames to the windshi.mp4 306.91 MB
2. Modeling/89. 091_Modeling section_Adding solidify to the doors.mp4 181.8 MB
2. Modeling/9. 011_Modeling section_completing the wings holes and adding subdivision surface.mp4 373.53 MB
2. Modeling/90. 092_Modeling section_Creating the door handle.mp4 226.25 MB
3. Unwrapping/1. 093_Unwrapping section_Starting with the body part 1.mp4 273.13 MB
3. Unwrapping/10. 102_Unwrapping section_Unwrapping the wing part 1.mp4 383.78 MB
3. Unwrapping/11. 103_Unwrapping section_Unwrapping the wing part 2.mp4 309.1 MB
3. Unwrapping/12. 104_Unwrapping section_Unwrapping the wing part 3.mp4 302.63 MB
3. Unwrapping/13. 105_Unwrapping section_Unwrapping the wing part 4.mp4 208.4 MB
3. Unwrapping/14. 106_Unwrapping section_Unwrapping the Light part 1.mp4 275.11 MB
3. Unwrapping/15. 107_Unwrapping section_Unwrapping the Light part 2.mp4 297.43 MB
3. Unwrapping/16. 108_Unwrapping section_Unwrapping the Front leg part 1.mp4 323.45 MB
3. Unwrapping/17. 109_Unwrapping section_Unwrapping the Front leg part 2.mp4 200.45 MB
3. Unwrapping/18. 110_Unwrapping section_Unwrapping the Back leg part 1.mp4 300.59 MB
3. Unwrapping/19. 111_Unwrapping section_Unwrapping the Back leg part 3.mp4 308.74 MB
3. Unwrapping/2. 094_Unwrapping section_Starting with the body part 2.mp4 285.27 MB
3. Unwrapping/20. 112_Unwrapping section_Creating Udims for the Light.mp4 122.84 MB
3. Unwrapping/21. 113_Unwrapping section_Creating Udims for the Front leg.mp4 165.81 MB
3. Unwrapping/22. 114_Unwrapping section_Creating Udims for the Back leg.mp4 227.23 MB
3. Unwrapping/23. 115_Unwrapping section_Starting with the bottom parts UV unwrapping part 1.mp4 299.93 MB
3. Unwrapping/24. 116_Unwrapping section_Starting with the bottom parts UV unwrapping part 2.mp4 324.84 MB
3. Unwrapping/25. 117_Unwrapping section_Starting with the bottom parts UV unwrapping part 3.mp4 243.06 MB
3. Unwrapping/26. 118_Unwrapping section_Starting with the bottom parts UV unwrapping part 4.mp4 297.95 MB
3. Unwrapping/27. 119_Unwrapping section_Starting with the bottom parts UV unwrapping part 5.mp4 334.63 MB
3. Unwrapping/28. 120_Unwrapping section_Starting with the bottom parts UV unwrapping part 6.mp4 303.17 MB
3. Unwrapping/29. 121_Unwrapping section_Starting with the bottom parts UV unwrapping part 7.mp4 241.94 MB
3. Unwrapping/3. 095_Unwrapping section_Starting with the body part 3.mp4 240.96 MB
3. Unwrapping/30. 122_Unwrapping section_Starting with the bottom parts UV unwrapping part 8.mp4 382.32 MB
3. Unwrapping/31. 123_Unwrapping section_Starting with the bottom parts UV unwrapping part 9.mp4 246.64 MB
3. Unwrapping/32. 124_Unwrapping section_merging objects and backing UVs.mp4 265.43 MB
3. Unwrapping/33. 125_Unwrapping section_Creating Udims for the bottom side parts part 1.mp4 284.09 MB
3. Unwrapping/34. 126_Unwrapping section_Creating Udims for the bottom side parts part 2.mp4 216.08 MB
3. Unwrapping/35. 127_Unwrapping section_fixing some variation in the UVs size.mp4 243.02 MB
1. Introduction/1. Introduction.mp4 159.77 MB
3. Unwrapping/5. 097_Unwrapping section_unwrapping the body using udims part 1.mp4 283.4 MB
3. Unwrapping/6. 098_Unwrapping section_unwrapping the body fixing the UV size part 2.mp4 355.56 MB
3. Unwrapping/7. 099_Unwrapping section_using udims for the Top body parts.mp4 234.34 MB
3. Unwrapping/8. 100_Unwrapping section_giving each part of the body a material.mp4 237.56 MB
3. Unwrapping/9. 101_Unwrapping section_Creating udims for the tail.mp4 63.92 MB
4. Texturing/1. 128_Prepering the scene to substance painter.mp4 373.04 MB
4. Texturing/10. 137_Substance painter_Changing the texture sets resolution.mp4 74.87 MB
4. Texturing/11. 138_Substance painter_Exporting the textures out of substance painter.mp4 60.33 MB
4. Texturing/12. 139_Importing the textures to Blender.mp4 216.02 MB
4. Texturing/2. 129_Sending the mesh to Substance Painter.mp4 162.76 MB
4. Texturing/3. 130_Fixing some problem with the mesh and the UVS.mp4 213.16 MB
4. Texturing/4. 131_Substance painter_ creating material for the body part 1.mp4 299.94 MB
4. Texturing/5. 132_Substance painter_ creating material for the body part 2.mp4 267.8 MB
4. Texturing/6. 133_Substance painter_Applying body materials to the rest of the geometry.mp4 215.41 MB
4. Texturing/7. 134_Substance painter_Creating material to the windshield.mp4 297.71 MB
4. Texturing/8. 135_Substance painter_Creating a material to the bottom parts.mp4 307.47 MB
4. Texturing/9. 136_Substance painter_copying and baste the material to the rest of the parts.mp4 264.19 MB
5. Rigging section/1. 140_Adding empty objects at the joints.mp4 230.09 MB
5. Rigging section/10. 149_Riggning section_creating animation to control the wing part 1.mp4 339.64 MB
5. Rigging section/11. 150_Riggning section_Adding action constraints to control the wings.mp4 198.33 MB
5. Rigging section/12. 151_Riggning section_Creating animation for the legs.mp4 328.09 MB
5. Rigging section/13. 152_Riggning section_Adding action constraints to control the legs.mp4 223.07 MB
5. Rigging section/2. 141_Riggning section_Riggning the front legs part 1.mp4 279.01 MB
5. Rigging section/3. 142_Riggning section_Riggning the front legs part 2.mp4 277.24 MB
5. Rigging section/4. 143_Riggning section_Riggning the front legs part 3.mp4 217.8 MB
5. Rigging section/5. 144_Riggning section_Riggning the Back legs.mp4 352.17 MB
5. Rigging section/6. 145_Riggning section_Rigging the wings part 1.mp4 317.36 MB
5. Rigging section/7. 146_Riggning section_Rigging the wings part 2.mp4 202.03 MB
5. Rigging section/8. 147_Riggning section_Copying the right side bones to the left side.mp4 363.84 MB
5. Rigging section/9. 148_Riggning section_Creating costom shapes to the bones.mp4 255.45 MB
6. Creating Environment/1. 153_Creating environment part 1.mp4 370.24 MB
6. Creating Environment/2. 154_Creating environment part 1.mp4 316.28 MB
7. Rendering/1. 155_Rendering the scene and edit the image with photoshop.mp4 260.12 MB
7. Rendering/2. 156_Taking another shot with new poses and motion blur.mp4 246.74 MB
9. Bonus lecture/1. Bonus video.mp4 16.71 MB
其他位置